Realistic Driving Mod - Euro Truck Simulator 2 Mods

Realistic Driving Mod v2.1

To coincide with the public release of ETS2 v1.11, a new version of  Realistic Driving Mod (aka Realistic Physics Mod) is now released. Version 2.1 includes numerous changes which are extremely crucial in improving the driving experience in-game. The name was once again changed for this release as Realistic Driving Mod is a more appropriate name that accurately reflects the changes to the game values that this mod contains. For those who are new to this mod, this mod features:

  1. Reduced wind resistance by 5% based on calculations with a more realistic Coefficient of Drag
  2. Reduced anti-sway bar value to allow greater body roll
  3. Lowered fifth wheel pitch angle to 7 degrees based on EU standards
  4. Adjusted truck chassis suspension travel to allow for more travel at the front axles
  5. 50+ new model-specific gearboxes (ZF AS Tronic, ZF Ecosplit, Volvo I-Shift, Scania Opticruise, Mercedes-Benz Powershift…) with and without retarder + with and without overdrive ratios for a better driving experience for different engine powers
  6. Softened front and rear truck chassis suspension to allow for a softer and smoother ride
  7. Softened truck cabin suspension to allow for more controlled pitch and roll
  8. New accurate and true-to-life engine options including the new Mercedes-Benz Actros MP4 4163 SLT OM 407 625HP/3000Nm engine option
  9. Reduced limits of cabin pitch and roll angles to ensure that truck model does not collide with itself and is more true-to-life
  10. Softened trailer suspension for more realistic roll and roll-over scenarios (*Please set the trailer stability to minimum for better gameplay)
  11. Increased steering angle to a more accurate 38 degrees
  12. Reduced wheel mass to 85.0 to reduce rolling resistance and better reflect real-life wheel mass
  13. Increased fifth wheel roll angle from 0 to 6 degrees for better simulation of trailer roll during cornering
  14. Corrected all truck chassis weights to allow for improved and more accurate truck acceleration (default values were over-exaggerated by about 2-4 tons)
  15. Increased cabin mass to 800.0 to better simulate cabin suspension behaviour

Optional: Increased clutch strength by a factor of 5 to better simulate engine and gearbox resistance and to reduce degree of ‘clutch-slipping/CVT feel’
* This can make the truck more difficult to drive especially on manual (with clutch) transmission option. Remember to accelerate slightly while in gear to move off in coordination with timely parking brake usage.

Please remember to set the trailer stability to minimum to improve gameplay and driving enjoyment! More changes and even better chassis suspension will be coming your way in the future (whenever SCS Software decides to allow for greater suspension tweaking and perhaps even full cab suspension simulation instead of the current fixed pivot-like system)! This mod works better on 4×2 and 6×2 chassis and can be a little too stiff for 6×4 chassis.

Credits: nfshp253
Compatibility: ETS2 1.11.x and 1.10.x


How to install mod for ETS 2:

  1. Download this mod.
  2. Extract it!
  3. Paste the .scs file(s) into your My Documents/Euro Truck Simulator 2/mod folder.
  4. Run game ~> Edit profile ~> Enable mod.
  5. Enjoy!

Download Realistic Driving Mod for ETS 2:



  1. Lone Wolf July 29, 2014
    • Will Potter July 30, 2014
      • Lone Wolf August 21, 2014
  2. Buzi July 29, 2014
    • Will Potter July 30, 2014
  3. Jason Lane July 31, 2014

Leave a Reply

Your email address will not be published.

Malcare WordPress Security Protection Status